5.1 特性 Features
u 低寄生電容 Low stray Capacitance
u 氮化鉭薄膜,形成自鈍化保護膜 Tantalum nitride thin film , self – passivating
u 適合金絲鍵合 Fit to gold wire bonding
u 電極耐溫特性400℃×6min Baking:400℃×6min
5.2運用 Applications
u 微波集成電路模塊 Microwave integrated circuit module
u 光通訊 Optical communication
5.3 電阻器結構 Figuration
5.4產品編號 Part Number Code
產品代碼 | 尺寸 | 材質 | 厚度 | 外形 | 電阻值 | 精度 | 鍍層體系 | 包裝方式 |
HR:薄膜電阻 | 0402 0603 0805 | A:99.6%Al2O3 D:96%Al2O3 N:AlN | 05 10 15 | A B C | 1R0:1.0Ω 100:10Ω 101:100Ω | J K M | T:TaN/TiW/Au F:TaN/TiW/Ni/Au | L:藍膜 T:盒裝 |
5.5選型指導 Selection Guide
★ TABLE5-1 選型推薦 Type Selection Recommendation
尺寸代碼 | 0201 | 0402 | 0603 | 0805 | 1206 |
尺寸(mm) | 0.508×0.254(±0.05) | 1.016×0.508(±0.05) | 1.524×0.635(±0.05) | 2.032×1.27(±0.1) | 3.048×1.524(±0.1) |
阻值(Ω) | 推薦規格型號 | ||||
25 | HR0201A10N250KTT | HR0402A10A250KTT | HR0603A10A250KTT | ||
50 | HR0201A10N500KTT | HR0402A10A500KTT | HR0603A10A500KTT | HR0805A10A500KTT | |
75 | HR0201A10N750KTT | HR0402A10A750KTT | HR0603A10A750KTT | HR0805A10A750KTT | |
100 | HR0201A10N101KTT | HR0402A10A101KTT | HR0603A10A101KTT | HR0805A10A101KTT | HR1206A10A101KTT |
150 | HR0402A10A151KTT | HR0603A10A151KTT | HR0805A10A151KTT | HR1206A10A151KTT | |
200 | HR0402A10A201KTT | HR0603A10A201KTT | HR0805A10A201KTT | HR1206A10A201KTT | |
250 | HR0402A10A251KTT | HR0603A10A251KTT | HR0805A10A251KTT | HR1206A10A251KTT | |
500 | HR0805A10A501KTT | HR1206A10A501KTT | |||
1000 | HR0805A10A102KTT | HR1206A10A102KTT | |||
極限阻值(Ω) | 10~200 | 10~500 | 10~1000 | 10~1500 | 10~2000 |
注:1、如果產品使用時功率較大,應選用氮化鋁做為基材;
2、可根據客戶需求定制產品尺寸及阻值。
04-28
How to reflow Guangdong LED chip lamp bead
Now plug-in lamp beads and chip lamp beads are required to be reflow welded, so the lamp beads can basically be under 240 ℃.If the LED lamp bead is reflow welded, the reflow temperature must be set, o
04-28
How to deal with the leakage of high voltage chip lamp beads
1. The primer is too thick, which leads to leakage.2. For example, when the lamp bead is welded, the improper operation of the wire welding machine causes the excessive pressure when the magnetic nozz